Home>Products>amp kits>MOJO25K

KLDguitar MOJO25


Fender style vintage hand wired guitar amp tube coupled with spring reverb by tubes  KLD MOJO 25R. It utilized eyelet board construction for service and reliability. High-quality coupling capacitors and resistors are selected for maximum tone, performance and reliability.


, Power : 25W RMS.
, Three 12ax7s, two 6L6s.(NOT INCLUDED)
, Pentode/Triode SW.
, Seven controls: Gain,Master,Bass,Middle,Treble,Reverb , SKY.
·Brass Eyelet hand wired board(2 mm thicken high quality FR4 board) soldered high quality components
,Tube driven Spring reverb : Belton BS2EB2C1B
, Standby.
, Output: 4 ohm, 8ohm, 16ohm .
, Precise parts used for lowest noise 5W metal oxide power resistors, 600V polypropylene film/foil and polyester military capacitors.
,Dimension of carton: 34(L)X32(W)X34(H) CM .
,Volume weight: 5kg .

MOJO25 Schematic
MOJO25 Layout
Build Difficulty: High Difficulty ,need high skill deal with noise caused by spring reverb.
To build this project knowledge in electric engeneering, experience with high voltage, and the reading and understanding of schematics and dealing with measurement device is highly recommended . There is NO step-by-step guide for beginners. The circuit and layout plan includes all relevant information. If you don't understand it then don't build it. THIS IS NOT A BEGINNERS PROJECT !
More than one amp assembly experience.


Price(included cost of Express delivery but not included additional cost of remote area):NO Stock now
No service to South Amercia

USD 167 (USA, Canada,México,Japan, Thailand,Asia)  

USD 170 ( Europe)DHL(5-7 days)

USD 172(Asutralia ) special air cargo 5-7days

Pack: Carton
Shippment: DHL , Fedex Delivery time: within seven days
Tracking :http://www.17track.net
Please send your name , address, Post code and TEL number to us after you pay.

Assembled instructions
2009 Kldguitar Electronics. All rights reserved. Terms/Privacy