Home>Products>amp kits>JCM25P


Model: JCM25P

KLDguitar JCM25P two channels 25 w PCB amp with total components soldered on PCB based on the late Marshall JCM 800 2204 circuit.The JCM800 amplifiers was a staple of 1980s hard rock and heavy metal bands. KLD-JCM25P has all features of JCM 800 except power of amp. The smaller power make it suitable for a wide variety of applications.
Skilled employees of KLD guitar have soldered total components on PCB of amp. Customer only need connect different parts of amp. This simplify assembly of amp , save time of connection of wires.This project is adapted to beginner of amp DIY who have limited electronic experience.


·Power :25 w(rms) 4,8 ohm
·Working voltage: 230V or 110V( need inform us during order).
·3 x 12ax7, 2 x 6L6 (Not included)
·Two inputs : Lead , Normal
·Six controls: Gain, Master ,Bass, Middle , Treble ,Presence
·Bias adjustable, it allows you enough adjustment range to bias 6V6, 6L6, EL34, KT66, KT77 and KT88 power tubes.
·FX loop in one socket.
ˇ¤ Output: 4 ohm, 8ohm, 16ohm .
ˇ¤ Precise parts used for lowest noise 5W metal oxide power resistors, 600V polypropylene film/foil and polyester military capacitors.
34(L)X32(W)X34(H) CM (Packed).
ˇ¤WEIGHT: 4.5kg.

JCM25P Schematic
JCM25P Layout

JCM 25 circuit analysis
Build Difficulty: Easy. Good first DIY project for Beginner.
Grounding.Basic connection between several big parts.
Recommend you have some basic electronic knowledge


Price(included cost of Express delivery ):

USD 156 (USA, Canada)

USD 159 ( Europe)

USD 161(Asutralia ) special air cargo 5-7days

Paypal: KLDguitar@yahoo.com
Chassis : zachmdhunter USA and Canada.
Other country: conatct with us if you want our chassis.
Pack: Carton
Shippment: DHL , Fedex
Delivery time: within seven days
Tracking number:http://www.17track.net
Please send your name , address, Post code and TEL number to us after you pay

Assembled instructions
2009 Kldguitar Electronics. All rights reserved. Terms/Privacy